Newstar Fastenings - Micro Screws

Micro Washers

Newstar Fastenings stock a wide range of micro washers in several different material options to cater to any potential customer demand. A Washer can commonly be described as a thin plate which a hole located in the middle used to distribute the load of a threaded fastener. However, they can also commonly be used to act as a spacer and/ or anti vibration and locking tool.

Our range of micro washers can be characterised into three different sections dependant on the customers requirement: Flat Washers are commonly used to spread a load whilst it also prevents any damage to a surface where a screw is fixed. It can also be used for insulation purposes.

Spring Washers/ Locking Washers are usually used when loosening due to vibrations is a potential issue. Locking Washers can be implemented into a customer's project by preventing the fastening to loosen. Examples of Spring and Locking washers include Wave Washers, Split Washers and a Toothed Washer (Internal and External).


A range micro washer types supplied by Newstar fastenings can be found below

Flat Washers DIN 125A

Micro Flat Washers DIN 125A

Overview: DIN 125A
Sizes: M1 to M3 (Larger Sizes Also Available On Request)
Materials: Stainless Steel (A2 & A4), Steal Zinc & Clear, Brass

Flat Washers DIN 125A
Spring Washers Rectangular Section DIN 127B

Micro Spring Washers Rectangular Section DIN 127B

Overview: DIN 127B
Sizes: M1 to M3 (Larger Sizes Also Available On Request)
Materials: Stainless Steel (A2 & A4), Steel HV 430-530 Zinc & Clear

Spring Washers Rectangular Section DIN 127B
Spring Washers Square Section DIN 7980

Micro Spring Washers Square Section DIN 7980

Overview: DIN 7980
Sizes: M2 to M3 (Larger Sizes Also Available On Request)
Materials: Stainless Steel (A2 & A4), Steel HV 430-530 Zinc & Clear

Spring Washers Square Section DIN 7980
Serrated Internal Lock Washers DIN 6798J

Micro Serrated Internal Lock Washers DIN 6798J

Overview: DIN 6798J
Sizes: M2 to M3 (Larger Sizes Also Available On Request)
Materials: Stainless Steel (A2 & A4), Spring Steel 350-425 HV10

Serrated Internal Lock Washers DIN 6798J
Serrated External Lock Washers DIN 6798A

Micro Serrated External Lock Washers DIN 6798A

Overview: DIN 6798A
Sizes: M2 to M3 (Larger Sizes Also Available On Request)
Materials: Stainless Steel (A2 & A4), Spring Steel 350-425 HV10

Serrated External Lock Washers DIN 6798A
Curved Spring Washers  DIN 137A

Micro Curved Spring Washers DIN 137A

Overview: DIN 137A
Sizes: M1 to M3 (Larger Sizes Also Available On Request)
Materials: Stainless Steel (A2/1.4310) & Steel HV430-530 Zinc & Clear

Curved Spring Washers  DIN 137A
Crinkle Washers BS 4463

Micro Crinkle Washers BS 4463

Overview: BS 4463
Sizes: M1.6 to M3 (Larger Sizes Also Available On Request)
Materials: Stainless Steel (A2) & Beryllium Copper (Made to BS 4463-1969)

Crinkle Washers BS 4463

Filter by...

Size

Length

N/A

Material

Brochure Contact Us